PALKUT- SL

METAL CUTTING COOLANTS SOLUBLE CUTTING OIL PALKUT- SL PALKUT SL is premium quality water soluble cutting ol, specially developed to form extremely stable milky emulsion even with extreme hard water (400 ppm) leading to excellent too! life and finish, in all metal cutting ‘operations, where cooling is more important than lubrication. thas excellentantrust and ant-roth quality and cause no corrosion of machine, work piece or tool Do not decompose chemically; leave objectionable odour, cause discoloration and staining. This is operator friendly and economical in use. PALKUT- SLis blended from refined mineral il, emulsifier and other additive, PROCEDURE + Dilution ratio with water varies between 5%to010% depending on severity of machining + While preparing emulsion always add cuting ol to water (notte other way round) to prevent inversion of the emulsion + Clean the coolant reservoir and system periodically, recharge the system with 1% solution of coolantto be charged and circulate forat least hr. andthen drain completely. + Checkthe emulsion strength regularly andtop up necessary, PERFORMANCE LEVEL: Meets IS 1115-2002 specifications. PACKING: 210L, SOL, 20L, SL CHARACTERISTICS 8.NO. | PROPERTIES PALKUT SL 1 _| Kinematic Viscosity, cSt @40°C 26-32 2__| Pash Point, COG, min. 160 3 _ | Copper Strip Corrosion test at 100°C for 3 hours 1a 4 _| ast ron Corrosion Test @3% (IP 287) Passes 5__| pH5% emulsion in DM Water 8595 6 | Emulsion test, §:1 and 20:1 rato in water Passes (No olor cream separation of 400 ppm hardness (as CaC03) observed) * The specifications are subject to varations/ development / customization.