PAL SYNCO-100, 200

METAL CUTTING COOLANTS SYNTHETIC CUTTING FLUID PAL SYNCO-100, 200 PAL SYNCO-100, 200 are premium quality water-soluble mineral oi free, fully synthetic type coolant, specially developed for use on ferrous metals only. These fluids do not undergo bacterial degradation and leave objectionable odour. Further these are non foaming, thus ensuring total safety of the workmen. These are operator friendly and economical in use due to good mixing ratio and lang service life. PAL SYNCO - 100 ithas several advantages over conventional soluble cutting oil. Recommended for machining and grinding of ferrous metals only. PAL SYNCO - 200 Recommended for machining and grinding of iron, steel, non-alloyed steel and nickel-chrome steel. Not recommended for the machining of non-ferrous metals. Dilution ratio with water varies between 4%-8% depending upon the operation and producthandled. % Concentrated mixture may lead to paint pee! off in the machines and some discoluration of the operator's skin. * Coolantshould be used only in clean circulating system. PERFORMANCE LEVEL: Meets IS 11186-1985 (Reaffirmed 1990) specifications. PACKING: 210L, 50L, 20L CHARACTERISTICS 'S.NO. | PROPERTIES: PAL SYNCO-100 | PAL SYNCO-200 1_| Appearance Green Green 2 _ | Solution Appearance, @2% in distiled water Clear fuorescent | Clear fluorescent 3__| Castiton corrosion test @ 3% (IP-287) Passes: Passes. @_ | pH5% dilution in DM water a 95 * The specifications are subject to variations/ development / customization,